In this example we connect a photoresistor to a micro:bit, the value read from the photoresistor corresponds to the amount of light present. The photoresistor is connected to P3 in.
In this example we will connect an RGB led to our micr:bit, lets look at RGB leds first RGB LEDs consist of one red, one green, and one blue LED..
In this example we will connect a GA1A12S202 Log-Scale Analog Light Sensor to an Arduino. The features of this sensor are as follows Output voltage increases with light on the.
The L3GD20 is a low-power three-axis angular rate sensor. This is the module I bought for reference More information can be found at http://www.st.com/content/st_com/en/products/mems-and-sensors/gyroscopes/l3gd20.html about the sensor Features Three selectable full scales.
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted as 16-bit twos complement and is.
The MAX44009 ambient light sensor features an I²C digital output that is ideal for a number of portable applications such as smartphones, notebooks, and industrial sensors. At less than 1µA.
- Microbit and KY-034 7 color flashing LED
- Microbit and KY-009 RGB LED
- Microbit and KY-029 Dual Color LED
- Microbit and KY-011 Dual Color LED
- Microbit and KY-020 Tilt switch
- The Sino:bit : an open source relative of the Micro:bit
- Microbit and VCNL4040 Proximity and Ambient Light Sensor Arduino example
- Microbit and SHT40 Digital Humidity Sensor Arduino example