Arduino

micro:bit and ML8511 sensor example

The ML8511 measures the amount of ultra violet rayses contained in sunlight, and it is used for the equipment which displays the suntan by a ultra violet rays, the guidance for UV care of skin, etc The sensor detects 280-390nm light most effectively. This...

micro:bit and DS1624 temperature sensor example

The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor. The nonvolatile memory is made up of 256 bytes of E2 memory..

micro:bit and MLX90614 infrared thermometer example

The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your Wemos and you will have a accurate.

micro:bit and SHT31 temperature and humidity sensor example

SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperatureplatform. The SHT3x-DIS has increased intelligence, reliability and improved accuracy specifications compared to its predecessor. Its functionality...

micro:bit and SHT21 humidity and temperature sensor example

The digital SHT2x humidity sensor series is used in high volumes in a wide variety of applications and has today become the de facto industry standard. The SHT2x series consists.

micro:bit and bmp180 sensor example

This bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter.

micro:bit and MCP9808 digital temperature sensor example

MCP9808 digital temperature sensor example using the Arduino IDE The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy. The MCP9808 comes with user-programmable registers that provide flexibility for temperature sensing applications. The registers allow user-selectable...

Arduino and the micro:bit onboard 3-axis accelerometer

The MMA8653FC is an intelligent, low-power, three-axis, capacitive micromachined accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt.

Use the micro:bit magnetometer with the Arduino IDE

Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to realize an orientation independent electronic compass that can provide.

← Previous 1 … 10 11 12 Next →