Arduino

micro:bit and L3GD20 angular rate sensor

The L3GD20 is a low-power three-axis angular rate sensor. This is the module I bought for reference More information can be found at http://www.st.com/content/st_com/en/products/mems-and-sensors/gyroscopes/l3gd20.html about the sensor Features Three selectable full scales (250/500/2000 dps) I2 C/SPI digital output interface 16 bit-rate value data output 8-bit temperature data output...

micro:bit and MMA8451 accelerometer example

The MMA8451 is a low-power accelerometer with 14 bits of resolution, with the following features: Embedded functions with flexible user-programmable options, configurable to two interrupt pins Embedded interrupt functions for overall.

micro:bit and ADXL345 accelerometer example

The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted as 16-bit twos complement and is.

micro:bit and MAX44009 ambient light sensor example

The MAX44009 ambient light sensor features an I²C digital output that is ideal for a number of portable applications such as smartphones, notebooks, and industrial sensors. At less than 1µA operating current, it is the lowest power ambient light sensor in the industry and features...

micro:bit and TSL2561 Luminosity Sensor example

The TSL2560 and TSL2561 are second-generation ambient light sensor devices. Each contains two integrating analog-to-digital converters (ADC) that integrate currents from two photodiodes. Integration of both channels occurs simultaneously. Upon.

micro:bit and BH1750FVI Ambient Light Sensor example

The BH1750FVI is an digital Ambient Light Sensor IC for I2C bus interface. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad.

micro:bit and DHT11 Temperature and Humidity Sensor example

In this example we will show a basic example of connecting a DHT11 Temperature and Humidity Sensor to your Arduino. This is a very nice little, low cost sensor which requires only a pull up resistor to VDD. This can easily be constructed on a...

micro:bit and MLX90393 magnetic field sensor example

The MLX90393 magnetic field sensor can be reprogrammed to different modes and with different settings at run-time. The sensor offers a 16-bit output proportional to the magnetic flux density sensed.

micro:bit and HMC5983 magnetometer example

The Honeywell HMC5983 is a temperature compensated three-axis integrated circuit magnetometer. This surface-mount, multi-chip module is designed for low-field magnetic sensing for applications such as automotive and personal navigation, vehicle.

← Previous 1 … 9 10 11 12 Next →