Code

micro:bit and HMC5983 magnetometer example

The Honeywell HMC5983 is a temperature compensated three-axis integrated circuit magnetometer. This surface-mount, multi-chip module is designed for low-field magnetic sensing for applications such as automotive and personal navigation, vehicle detection, and pointing. The HMC5983 includes our state-of-the-art, high-resolution HMC118X series magnetoresistive sensors plus an...

micro:bit and ML8511 sensor example

The ML8511 measures the amount of ultra violet rayses contained in sunlight, and it is used for the equipment which displays the suntan by a ultra violet rays, the.

micro:bit and DS1624 temperature sensor example

The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor. The nonvolatile memory is made up of 256 bytes of E2 memory..

micro:bit and MLX90614 infrared thermometer example

The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your Wemos and you will have a accurate thermometer with a resolution of 0.01 and a accuracy of 0.5 degrees, or for that...

micro:bit and SHT31 temperature and humidity sensor example

SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperatureplatform. The.

micro:bit and SHT21 humidity and temperature sensor example

The digital SHT2x humidity sensor series is used in high volumes in a wide variety of applications and has today become the de facto industry standard. The SHT2x series consists.

micro:bit and bmp180 sensor example

This bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. The BMP180 replaces the BMP085. Specification Pressure sensing...

micro:bit and MCP9808 digital temperature sensor example

MCP9808 digital temperature sensor example using the Arduino IDE The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy. The MCP9808.

2 I2C scanner examples for the micro:bit

The micro:bit has 2 I2C devices the accelerometer and magnetometer. the address of the devices are as follows Device I2C Address Accelerometer 0x1D Magnetometer (compass) 0x0E Now you can also connect.

← Previous 1 … 11 12 13 … 15 Next →