The digital SHT2x humidity sensor series is used in high volumes in a wide variety of applications and has today become the de facto industry standard. The SHT2x series consists.
This bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter.
The micro:bit has 2 I2C devices the accelerometer and magnetometer. the address of the devices are as follows Device I2C Address Accelerometer 0x1D Magnetometer (compass) 0x0E Now you can also connect.
The MMA8653FC is an intelligent, low-power, three-axis, capacitive micromachined accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt.
You can now use the Arduino IDE to develop and program your Micro:Bit, in my view thats a good thing to add this support as its a popular development tool.
In this next example using the block editor we will use the accelerometer that is on the Micro:bit board to detect when the micro:bit is being shaken, if it is.
- Microbit and KY-018 Photoresistor
- Microbit and KY-034 7 color flashing LED
- Microbit and KY-009 RGB LED
- Microbit and KY-029 Dual Color LED
- Microbit and KY-011 Dual Color LED
- Microbit and KY-020 Tilt switch
- The Sino:bit : an open source relative of the Micro:bit
- Microbit and VCNL4040 Proximity and Ambient Light Sensor Arduino example